Procedure
5. Referring to table below, use
+/-
keys to enter a value for each setting.
Choose
NEXT
to cycle through settings
Save settings
Procedure
6.
FINISH
7.
SAVE
Contact mode settings
Contact
dose
Volume of fluid dispensed when external voltage pulse is received at input pin 2, or the green start
button is pressed.
Flow rate
Determines time taken to complete each dose.
Contact
memory
Determines pump behaviour in response to pulses received while a dose is in progress:
l
Ignore
—pump will not store pulses.
l
Add
—pulses received during dosing will be queued in memory. Queued pulses will
activate dispensing when the current dose has finished.
If pulses are buffered in memory the pump will not stop between doses.
Once Contact mode enabled and configured, easily view Contact mode home screen and settings via
MODE
button.
15 INSTALLATION: PART 6 (SETTING UP THE PUMP (CONTROL SETTINGS))
135
