WATANABE WPMZ-1, Instruction Manual

Page: 81 / 91

Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
80
IM-0882-03
1st Layer 2nd Layer
3rd Layer
(setting items)
4th Layer (setting values)
Remarks
Initial values Settable values
2.Output
CompareList --- --- Go to screen of CompareList
CompareAL1
CompareAL2
CompareAL3
CompareAL4
PatternSelect Pattern in use Pattern 1/2/3/4/5/6/7/8 Select pattern No. to set.
OutputDispValue None None/Ach/Bch/Calc
ActCondition Always
Always/ExceptNearZero/OnStable
/ OnStableExceptNearZero/OnHold
Select a condition of comparison.
CompareMode LevelJudge LevelJudge/ZoneJudge/DiffJudge
OnConditions
Excess Excess/LessThan Only LevelJudge.
InTheZone InTheZone/OutsideTheZone Only ZoneJudge.
Threshold
10000
0
Threshold
：
±99999
Hysteresis
：
0
～
99999
Only LevelJudge.
0
10000
0
ZoneLowerLimit
：
±99999
ZoneUpperLimit
：
±99999
Hysteresis
：
0
～
99999
Only ZoneJudge.
10000
1.00
ChangeAmount
：
±99999
DetectionInterval
：
0.00
～
99.99[sec]
Only DiffJudge
OnDelay None
None/20ms/50ms/100ms/200ms/500ms
1s/5s/10s/20s Compare ON/OFF after ActCondition is kept
certain time set here.
OffDelay None
OutputMode Normal
Normal/Latch/OneShot5ms/10ms/20ms
/50ms/0.1s/0.2s/0.5s/1s/2s
Select an output mode.
OutputLogic Negative(NO) Positive(NC)/Negative(NO) Select an output logic.
OnBgColors Black Black/Red/Yellow/Green Priority: AL1 > AL2 > AL3 > AL4
Analog
Output
PatternSelect Pattern in use Pattern 1/2/3/4/5/6/7/8 Select pattern No. to set.
OutputRange 0-10V 0-10V/±10V/1-5V/0-20mA/4-20mA Select a type of output range.
OutputDispValue None None/Ach/Bch/Calc Select a ch referenced for analog output.
OutputScale
0
10000
0%
：
±99999
100%
：
±99999
Scaling of analog output.
Set 0% and 100% value.
BCD Output
PatternSelect Pattern in use Pattern 1/2/3/4/5/6/7/8 Select pattern No. to set.
OutputDispValue None None/Ach/Bch/Calc Select a ch referenced for BCD output.
DataSignalLogic Negative Positive/Negative Select an output mode.
SyncSignalLogic Negative Positive/Negative Select an output mode.
ModbusCom
SlaveAddress 1 1
～
31 Set ID of the product.
Baudrate 19200bps 9600bps/19200bps/38400bps Select a baudrate.
Parity Even None/Even/Odd Select a type of parity bit.
RS-232C Com
Protocol Modbus-RTU
ModbusRTU/OriginalCommand/OriginalO
utput
Select a protocol.
Baudrate 19200bps 9600bps/19200bps/38400bps Select a baudrate.
Parity Even None/Even/Odd Select a type of parity bit.
DataLength 7bit 7bit/8bit
Enable when Protocol is OriginalCommand
or OriginalOutput.
Stopbit 1bit 1bit/2bit
Enable when Protocol is OriginalCommand
or OriginalOutput.
Delimiter CR LF CR / CR LF
Enable when Protocol is OriginalCommand
or OriginalOutput.
3.Display
DispSelect
MeasureSelect
1ch product
Ach, Ach + Comp
Level, Trend
2ch product
Ach + Bch,
Level, Trend
Ach/Bch/Calc/Ach+Comp/Bch+Comp
/Calc+Comp/Ach+Bch/Calc+A+B
*Bch and Calc is enable in 2ch product.
LevelSelect
Ach/Bch/Calc/Ach+Bch *Bch and Calc is enable in 2ch product.
TrendSelect
LevelDisp
PatternSelect Pattern in use Pattern 1/2/3/4/5/6/7/8 Select pattern No. to set.
Ach Scale
0
10000
LowerLimit
：
±99999
UpperLimit
：
±99999
Set scale of level screen. Bch Scale
CalcScale
AL Select
AL1
～
AL4
：
ON AL1/AL2/AL3/AL4
TrendDisp
PatternSelect Pattern in use Pattern 1/2/3/4/5/6/7/8 Select pattern No. to set.
Ach Scale
0
10000
LowerLimit
：
±99999
UpperLimit
：
±99999
Set scale of trend screen. Bch Scale
CalcScale
AL Select
AL1
～
AL4
：
ON
AL1/AL2/AL3/AL4
TimeAxis 1s/div
100ms/div,1s/div,2s/div,5s/div,10s/div,
30s/div,60s/div120s/div
Set time scale of division time.