Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
30
IM-0882-03
ANALOG OUTPUT
*In products that have no analog output option, this setting item is invisible.
Setting of analog output is proceed as follow.
Each setting items are set up at [Setting]
⇒
[Input]
⇒
[AnalogOutput]
Descriptions of each setting item are described on the following pages after this section.
Moreover, please check "output detailed setting" for the setting not described in the above flow.
* Each setting and calibration value are saved and reflected at the timing when the menu is closed and
returned to
the measurement screen.
Note that the contents will not be saved if the power is turned off before closing the menu.
PatternSelect
You can store and set up 8 patterns (8 kinds) of various settings such as input and output with this unit, you can
select the pattern to save the setting in "PatternSelect".
The pattern number being set is displayed as "P5" on the upper right of the setting screen as shown below.
Operation:[MENU]
⇒
[Output]
⇒
[AnalogOutput]
⇒
[PatternSelect]
Setting value:Pattern1, Pattern 2,
・・・・・
Pattern 8
* At the time of opening the menu, the setting pattern is the value selected as operating on the measurement
screen.
* Since the setting pattern is common in each setting, "PatternSelect" such as input setting is also changed when
"PatternSelect" is changed by "AnalogOutput”.
OutputRange
Select output range of analog output.
*Be careful to connect output terminals. There are 2 terminals that one of it is for voltage output, and another is
for current output. (For wiring, please confirm "CONNECTING TERMINALS”.)
Operation:[MENU]
⇒
[Output]
⇒
[AnalogOutput]
⇒
[OutputRange]
Setting value: 0-10V (Default) (Load resistance of 2 kΩ or more)
±10V
(Load resistance of 2 kΩ or more)
1-5V
(Load resistance of 2 kΩ or more)
0-20mA (Load resistance of 550 Ω or less)
4-20mA (Load resistance of 550 Ω or less)
Pattern select
Select output range
Select reference source
Select output scale
