Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
61
IM-0882-03
SettingProtect
This function forbids changing other settings. You need to disable this function to change other settings.
(You can check settings but can’t change settings.)
*When this function is enabled, protecting icon is displayed as follows.
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[SettingProtect]
Setting:
Disable (Initial state), Enable
■
DisplayUpdateCycle
Select a cycle of updating display.
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[DisplayUpdateCycle]
Setting:
10 sps (Initial state), 1 sps
PatternCopy
Copy pattern to other pattern.
Operation:[MENU]
⇒
[System]
⇒
[General]
⇒
[PatternCopy]
Setting:
CopyFrom
Pattern1, 2, 3, 4, 5, 6, 7, 8
Copy To
Pattern1, 2, 3, 4, 5, 6, 7, 8
Initialize
UserDefaultSave
Save all settings as a user setting.
Operation:[MENU]
⇒
[System]
⇒
[Initialize]
⇒
[UserDefaultSave]
Setting:
- - -
UserDefaultLoad
Initialize all settings to the saved setting above.
Operation:[MENU]
⇒
[System]
⇒
[Initialize]
⇒
[UserDefaultLoad]
Setting:
- - -
FactoryDefaultLoad
Initialize all settings to the factory setting.
Operation:[MENU]
⇒
[System]
⇒
[Initialize]
⇒
[FactoryDefaultLoad]
Setting:
- - -
