Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
34
IM-0882-03
Threshold
Set threshold for comparison output.
Setting value of [Threshold] changes by setting value of [CompareMode].
Operation:[MENU]
⇒
[Output]
⇒
[CompareAL1], [CompareAL2], [CompareAL3], [CompareAL4]
⇒
[Threshold]
[CompareMode] is “Leveljudge”
Setting value: Threshold
±99999 (Default is10000)
Hysteresis 0
～
99999(Default is 0)
[CompareMode] is “Zonejudge”
Setting value:
ZoneLowerLimit
±99999 (Default is 0)
ZoneUpperLimit
±99999 (Default is 10000)
Hysteresis 0
～
99999(Default is 0)
*Same hysteresis is applied in ZoneLowerLimit and ZoneUpperLimit.
[CompareMode] is “Diffjudge”
Comparison output turns ON when
（
MAX - MIN
）
> ChangeAmount (See below)
Setting value: ChangeAmount
0
～
99999 (Default is 10000)
DetectionInterval 0.00
～
99.99[sec] (Default is 1.00)
*If “DetectionInterval” is 0.00, “Diffjudge” is disabled.
“Diffjudge” operating diagram
*If setting value of [OutputMode] is “Normal”, comparison output continues until end of “DetectionInterval”.
*When Compare Reset is ON, comparison output is always set to OFF.
【DetectionInterval】
【DetectionInterval】
Display value
OutputMode
（OneShot）
ON
MAX
MIN
MAX
MIN
(MAX－MIN)
(MAX－MIN)
OutputMode
（Latch）
ON
OFF
OFF
ON
OFF
OutputMode
（Normal）
Compare
Reset
Function ON
