Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
10
IM-0882-03
4.
MOUNTING METHOD
EXTERNAL FORM DIMENSIONS
PANEL MOUNTING METHOD
Panel cut dimensions are as shown by the figure below.
1
）
Removal of case fixing attachments
2
）
Installment of case fixing attachments
CAUTION
○ Prior to the installation of this product please read “1-1. ENVIRONMENTS AND CONDITIONS
OF USE” (page6)
○ In the case of installation or replacing of this product, please pay attention to the damage and
accident by dropping.
○ In the case of some wires are connected, do not install or replacing this product. It may cause shock,
damage fire etc.
Slide the attachment to the direction of arrow with
lifting the clicks of the lock lever by a flat-blade
screwdriver etc and remove it.
①
Insert the body into the
panel from the front side.
②
Insert the case fixing attachments from back
side at both left and right sides and hold the
panel between the body and them.
Recommended panel thickness : 0.8 to 5mm
+0.8
92
+
0
.6
-
0
MIN 120
M
IN
7
0
45
-0
