Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
IM-0882-03
7.
MODES OF OPERATION
OPERATION ON MEASUREMENT DISPLAY
The system starts up after power on, and works as shown below.
【
Measurement Display
】
By pressing the DISP key, each measurement display including level display, and trend display is displayed
in order.
The measurement displays to be displayed can be selected by "screen setting".
【
Setting
】
You can make various settings.
Press the "MENU" key to open the setting screen and press the "MENU" key again to return to the
measurement display.
【
Shortcut Register
】
Register the shortcut function.
Press the "FUNC" key to open the Shortcut Register screen and press the "FUNC" key again to
return to the measurement display.
You can register up to 4 from external control functions.
【
Perform Shortcut Register
】
By holding down any of the four-way controller keys for 1sec, the shortcut function will be done.
* Shortcuts will not work if the same function is done via communication control or external control.
【
Key Lock
】
By holding down both “DISP” and “ENTER” keys for 1sec, the key lock function will be done.
If the key lock function is doing, the system will not accept any key operations except key lock.
* Since the measurement screen will change if the "DISP" key is pressed first,
you should first press the "ENTER" key and then press the "DISP" key.
DISP
DISP
MENU
FUNC
Setting
DISP
Shortcut Register
Measurement Display
Perform Shortcut function
Key Lock
DISP
ENTER
Holding down for 1sec
+
DISP
Holding down
for 1sec
