WATANABE WPMZ-1, Instruction Manual

Page: 57 / 91

Graphical Digital Panel Meter WPMZ-1 INSTRUCTION MANUAL
56
IM-0882-03
Level display
Level display show display values and level values.
You can set each upper limit and lower limit freely and they are also shown.
1 parameter or 2 parameters are shown in the display.
Number Explain
①
Display title of the screen.
*First element is Ach, Second element is Bch.
②
Display level value of first element(Ach) as bar graph.
When the value is a positive number, the color of the bar graph is orange, and when the
value is a negative number it is displayed in blue.
③
Display level value of second element(Bch) as bar graph.
When the value is a positive number, the color of the bar graph is orange, and when the
value is a negative number it is displayed in blue.
④
Upper and lower limit of first element(Ach).
⑤
Upper and lower limit of second element(Bch).
⑥
Display value and unit of first element(Ach).
⑦
Display value and unit of second element(Bch).
⑧
While line in bar graph means zero value.
⑨
Green line means lower threshold of comparison judgement. You can select thresholds that
should be displayed in [MENU]
⇒
[Display]
⇒
[Display select]
⇒
[LevelSelect]
⇒
[ALSelect]
*Threshold for other input channel is not displayed.
⑩
Red line means upper threshold of comparison judgement. You can select thresholds that
should be displayed in [MENU]
⇒
[Display]
⇒
[Display select]
⇒
[LevelSelect]
⇒
[ALSelect]
*Threshold for other input channel is not displayed.
Caution:Others except
①
to
⑩
are listed in [6-1. NAMES OF EACH PART].
Caution
Thresholds are displayed only when the setting “Comparison mode” is “Level operation”.
PatternSelect
You can store and set up 8 patterns (8 kinds) of various settings such as input and output with this unit, you can
select the pattern to save the setting in "PatternSelect".
* Actual pattern switching is done by "Pattern switching of external control function" or "Assign pattern
switching of external control function to shortcut key".
Operation:[MENU]
⇒
[Display]
⇒
[LevelDisp]
⇒
[PatternSelect]
Setting value:Pattern1, Pattern 2,
・・・・・
Pattern 8
* At the time of opening the menu, the setting pattern is the value selected as operating on the measurement
screen.
* Since the setting pattern is common in each setting, "PatternSelect" such as input setting is also changed when
"PatternSelect" is changed by "LevelDisp”.