Notice
Date
Page
01201055
INSTRUCTION
HANDBOOK
1298
13
11
3584
To change parameters in the current program step
During program operation the
display will look like this (see
section « To start the wash
program »).
You can alter the following parameters :
Prewash, Main wash, Rinse, Drain, Soak, Rinse
repeat
Length of program step (max. 9998 seconds),
heating temperature (max. 97°C (205°F)).
Extract
Length of program step (max. 3600 seconds),
extraction speed.
Use the numeric keys to enter
the ew parameter.
Press SELECT.
If you have entered the wrong parameter
Continue pressing numeric keys to overstrike the
incorrect parameter.
Note :
always use the same number of digits as used
on the display to overstrike the incorrect parameter.
Example :
To change the time for the program step to
30
seconds, enter
030
to overstrike the earlier parameter.
Press SELECT.
Press
ñ
one or more times …
… to highlight the time
required.
ATTENTION
Never program a temperature above
to 90°C (195°F).
WARNING
If you happen to make your own program, you must not input cold water
in the cage while this later has a washing bath at 85°C (185°F), with the
cage stopped. It is compulsory that the cage turns while letting in cold
water.
A bad programming can, in this particular case, be the cause of the break-
age of the doors' windows.
11. Machine
operation
991 NORMAL 95 °C STD
991 NORMAL 95 °C STD
STEP TIME :
STEP TIME
1
1
720 SEC
720 SEC
85 °C
85 °C
21 °C
21 °C
70 MIN
70 MIN
1000 RPM
1000 RPM
SET TEMPERATURE :
SET TEMPERATURE :
ACTUAL TEMPERATURE :
ACTUAL TEMPERATURE :
REMAINING TIME :
RAMAINING TIME :
PAUSE
PAUSE
RAPID ADVANCE :
RAPID ADVANCE :
DRUM SPEED :
DRUM SPEED :
1
2
3
4
5
6
7
8
9
0
