Notice
Date
Page
01201055
INSTRUCTION
HANDBOOK
0999
46
11
11. Machine
operation
4784
SERVICE PROGRAM
MAKE A CHOICE :
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
CALIBRATE THE SCALE
RESET SCALE TO ZERO
RESET TARE TO ZERO
TARE SCALE
SET TARE TO A CERTAIN VALUE
READ TARE VALUE
READ VERSION NUMBER
EXIT
CALIBRATE THE SCALE
ZERO CALIBRATION
4786
4785
1
2
3
4
5
6
7
8
9
0
ENTER TARE IN HG AND
PRESS SELECT
SCALE ADJUSTEMENTS
SET TARE TO A CERTAIN VALUE
SCALE ADJUSTMENTS
DONE !
PRESS SELECT
SET TARE TO A CERTAIN VALUE
Press SELECT.
Press SELECT.
Press SELECT.
This screen shows that the
parameter has been entered
successfully.
Set tare to a certain value
(for machines with weighing equipment installed only)
Use the numeric key to enter
the tare you require, unit :
hectograms ; (1 hectogram =
100 grams).
Set tare to a certain value
This function lets you enter a value for the tare
parameter, i.e. a weight value which the weighing
equipment will disregard when showing a net weight on
the display. The function will automatically clear any
earlier tare value when you enter a new one.
If your value is not entered successfully at this point,
you will see an error message equivalent to : "FAILED.
PRESS SELECT" on the display. For troubleshooting,
see the section "Fault-finding, weighing equipment" in
the machine manual.
Press
ò
three times to
highlight "SET TARE TO A
CERTAIN VALUE".
