Notice
Date
Page
01201055
INSTRUCTION
HANDBOOK
1100
75
11
11. Machine
operation
Information in display :
Function no allowed.
Probable cause :
A function has been selected in the program which cannot be carried out.
Fault-finding procedure :
•
Check that the function in question is switched on under "Settings".
•
Check that the cables for CPU communication, power supply and load cells are connected.
•
Check that these cables are all in good condition.
•
If any cable is faulty, replace it.
Information in display service program :
Weighing equipment not connected.
Probable cause :
CPU board not communicating with scale unit.
Fault-finding procedure :
•
Check that the connectors for CPU communication, power supply and load cells are
connected on the scale unit.
•
Check that their cables are all in good condition.
•
If any cable is faulty, replace it.
