Notice
Date
Page
01201055
INSTRUCTION
HANDBOOK
1298
9
11
During a wash program :
Press
to make the
machine pause during the
wash program.
Two ways of pausing during a wash program
There are two ways of pausing during a wash
program :
1 By pressing
.
2 As an additional function. This is described in
section « Pause ».
Additional functions during the program
Rapid advance (see section « Rapid advance »)
Rapid advance through the program to the
program step required. Rapid advance can be
used to move both forwards and backwards
through the program.
Pause (see section « Pause »)
The machine stops. The drain valve remains
closed. Alternative method for pausing during
program :
Press
.
Manual functions (see section « Manual operation
during program operation »)
The following functions can be controlled manually
during the course of the program :
- all water valves, drain and pumps (where
applicable).
- limit highest extraction speed.
- motor on/off after end of wash program.
- flush detergent.
Text (see section « Text »)
Display description of wash program (if available).
Select a different wash program (see section "To
change the wash program after program operation
has commenced")
You can switch to using a different wash program
at any stage during the wash. Once this function
has been selected, the current step (for example,
rinse) of the earlier program will be allowed to
finish and then the new program will start (from the
beginning).
Change temperatures scale °C or °F (see section
« To change temperatures scale °C/°F »)
Auto restart (see section « Auto restart »)
Here you enter the number of times you wish the
wash program to restart automatically.
To change parameters in the current program
step :
Certain program step parameters can be altered
during the course of the program. In the example
(left), the length of the program step and the heating
temperature can be altered.
The following information is
displayed during the wash
program :
Current program step
Time left for this program step
Set temperature
Actual temperature
Remaining program time
Drum speed
If required :
Select a function using the
cursor keys.
Press SELECT.
3583
To terminate a program before it has finished
• Select RAPID ADVANCE and press SELECT.
Advance to « END OF PROGRAM » and press
SELECT.
• Wait until « THE DOOR IS OPEN » appears on the
display.
• Now the door can be opened.
3627
11. Machine
operation
991 NORMAL 95 °C STD
STEP TIME :
PROGRAM STEP : MAIN WASH
1
720 SEC
85 °C
21 °C
70 MIN
48 RPM
STEP TIME
SET TEMPERATURE :
ACTUAL TEMPERATURE :
SET TEMPERATURE
------------------------------------------------------------------
REMAINING TIME :
RAPID ADVANCE
PAUSE
PAUSE
RAPID ADVANCE :
DRUM SPEED :
MANUAL FUNCTIONS
TEXT
SELECT NEW WASH PROGRAM
CHANGE °F/°C
AUTO RESTARTS
