manualshive.com logo in svg

Wascomat WS3 230 H, Instruction Handbook Manual

Share
Download
Wascomat WS3 230 H Instruction Handbook Manual Download Page 65

Notice

Date

Page

01201055

INSTRUCTION

HANDBOOK

11. Machine

operation

0999

1

11

Emergency stop

The emergency stop must be unblocked, if not the machine will not work (to unblock, turn the
red button to the right).

If the machine for some reason has to be stopped, abnormal or dangerous running, press
emergency stop button.

Nota : it is necessary to wait for 30 seconds before resetting after any action on the emergency
stop.

Release the emergency stop, by turning it clockwise only after checking what motivated this
stop.

D0543

D0544

Gas exchanger

Two indicators are situated on the top of the
gas exchanger.

White indicator (1) light = "gas heating
On".

Yellow indicator (2) light = "ignition gas
burner fault indicator".

The yellow indicator remains on if a fault
occurs when the gas burner ignites, the gas
heating does off and the machine stops
functioning. Verify the working of the gas
exchanger. If la fault remains, consult your
after-sales service.

D0697

1

2

Auxiliary controls

Summary of Contents for WS3 230 H



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands