Notice
Date
Page
01201055
INSTRUCTION
HANDBOOK
1100
68
11
11. Machine
operation
Checking accuracy of weighing equipment
display
Twice a year you need to check that the
weighing equipment is displaying the accu-
rate weight, with the aid of an object of
known weight. If the weighing equipment
does not show the real weight of this object,
you will need to follow the "Zero calibration"
procedure, a function in the Clarus software.
Follow the instructions under "Zero calibra-
tion" in the "Machine operation" section of
the manual. If this is unsuccessful, the
weighing equipment will have to be
recalibrated using the "Calibrate the scale"
function, as described under "Machine
operation".
If the weighing equipment has a fault
Follow the troubleshooting procedure under
the heading "Fault-finding, weighing equip-
ment".
If you cannot rectify the problem with the
help of that section, make a note of the
weighing equipment version number before
you contact the service department.
To find the weighing equipment version
number, access the service program, select
"Scale adjustments", then "Read version
number".
