manualshive.com logo in svg

Wascomat WS3 230 H, Instruction Handbook Manual

Share
Download
Wascomat WS3 230 H Instruction Handbook Manual Download Page 57

Notice

Date

Page

01201055

INSTRUCTION

HANDBOOK

Washer-extractor electricity power supply

CAUTION

Prior to use, the washer-extractor should be plugged into a correctly
earthed power socket complying with the standards in force.

SAFETY

The electrical installation of the machine must be undertaken by quali-
fied personnel.

CAUTION

Ensure that the electrical voltage is correct and that the power of
your supply is sufficient, before connecting the machine.

The use of power electronics (variator or filter for example) may lead to unexperted release of
breakers with 30 mA differential current device.

To avoid these untimely activations, you ought to use differential protecting systems with re-
sidual current only, having a high level of immunity as regards leakage transient current.

This type of breaker should thus be avoided, or a value of 

300 mA

 maximum should be ob-

served according to standard NFC 15100 paragraph 532.2.6.

9. Installation

0401

24

9

Summary of Contents for WS3 230 H



















































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands