11.11
2
OL.1010EX.
M.
-
-
-
-
II 3 D
MVE
DECLARATION OF CONFORMITY
KONFORMITÄTSERKLÄRUNG
DECLARATION DE CONFORMITE
DEKLARACJA ZGODNOŚCI
20
EC DECLARATION OF CONFORMITY
According to attached X of Directive 94/ 94/9/EC, with the requirements of the following Community Directives and subsequent modifications
Serial Number: Refer to the last page of this manual.
Conform with the following directive listed on the following declaration.
-
Directive “ATEX” 94/9/EC of 23 March,1994
-
Directive “EMC” 2004/108/EC of 15 December, 2004
The conformity has been verified according to the conditions included in the following standard documents:
CEI EN 60034-1, CEI EN 61241-0, CEI EN 61241-1
Declare
that the family of external electric vibrators:
Internal code: Electric vibrator
MVE
.....
...
..
For U.S. MARKET:
2 POLES (3600 rpm max)
4 POLES (1800 rpm max)
6 POLES (1200 rpm max)
8 POLES (900 rpm max)
DC= Direct current motor
Empty space for three phase motor
M= Single phase motor
12= 12V / 24=24V supply voltage. For DC motor
Fc max from 20 to 13000 Kg. For U.S. Market from 48 to 28660 Lb (three-phase motor)
Fc max from 4 to 300 Kg. For U.S. Market from 8 to 700 Lb (single phase motor)
Fc max from 50 to 200 Kg. For U.S. Market from 110 to 440 Lb ( Direct current motor)
003= 3000 rpm max
015= 1500 rpm max
010= 1000 rpm max
075= 750 rpm max
DC= Direct current motor
II 3 D Ex tD A22 Tx IP66
N.TÜV 05 ATEX 2768X
Environmental Temperature: -20°C / +40°C
DECLARATION OF INCORPORATION
According to the Machine Directive 2006/42/EC the family of external vibrators over mentioned are identified as “PARTLY COMPLETED MACHINERY”
“B” Type:
»
These products are manufactured according to 2006/42/EC AND SUBSEQUENT AMENDMENTS
»
These products must not be put into service until the
fi
nal machinery into which it is to be incorporated has been declared in conformity with the provisions of this Directive, where appropriate.
»
The protection requirements of directive 2006/95/EC have been observed in accordance with Appendix I No. 1.5.1 Machinery Directive 2006/42/EC."
According to Annex II B of Directive 2006/42/EC machines, the following essential requirements of safety and health protection are applied and respected;
all necessary requirements related to annex I of the machine directive 2006/42/EG are applied including interfaces described in the risk assesment.
Medolla 04/11/2011
Rel. A
Giorgio Gavioli
(General Manager)
Technical documentation is compiled in accordance with part B of Annex VII.
OLI SpA undertakes to transmit by mail or e-mail, in response to a reasoned request by the national authorities, relevant information on the products
mentioned on the present declaration, except for intellectual properties of the producer.
The technical documentation is kept at OLI SpA, Via Canalazzo, 35 – 41036 Medolla (MO) Italy
SPA
Via Canalazzo, 35 - 41036 Medolla (MO) - ITALY
1.1.1. - 1.1.2. - 1.1.3. - 1.1.5. - 1.3.1. - 1.3.2. - 1.3.3. - 1.3.4. - 1.3.7. - 1.3.8. - 1.3.9. - 1.4.1. - 1.5.1. - 1.5.2. - 1.5.4. - 1.5.5. - 1.5.6. - 1.5.7 - 1.5.8. - 1.6.1. - 1.6.4. - 1.7.1. - 1.7.2. - 1.7.3. - 1.7.4. - 1.7.4.1. - 1.7.4.2. - 1.7.4.3.
Progressive N° (1...999999).
Test Line (A...Z)
Year (2012, .....)
YY
X
........ A
Declaration of conformity / Incorporation relise (A...Z).
Serial number:
