WAGNER TITANIUS TOP-SENS, Technical Manual

Page: 18 / 250

Product Description
TITANUS
TOP·SENS
®
/Rev.a
18 06/13
oped patented aspiration-reducing film sheets with marking tape and clips
that permit an easy mounting and avoid secondary noise. Another advan-
tage is the quick and easy retrieval and check of the air sampling point di-
ameters.
The system’s air sampling points can be compared to spot-type detectors.
The monitoring areas can therefore be designed according to the relevant
valid national regulations.
The diagnostic software permits quick and reliable fault finding for mainte-
nance and service. The current device condition and any saved data can be
downloaded to a PC via a special interface.
The fan voltage can be set according to project planning by re-plugging the
plug-in jumpers.
With TITANUS
TOP·SENS
®
devices, the fan voltage can be set between 6.9
V and 9 V by means of the plug-in jumpers on the main board.
The voltage with TITANUS
TOP·SENS
®
-SL devices can be set by means of
the fan control circuit boards FC-2 and FC-3.
▪ The voltage can be set to 6.5 V, 6.9 V and 9 V with the FC-2 fan control
circuit board. The FC-2 fan control circuit board is standard in all TITA-
NUS
TOP·SENS
®
-SL devices.
▪ The voltage can be set to 10 V, 11 V and 12 V with the FC-3 fan control
circuit board. The FC-3 fan control circuit board available as an option for
all TITANUS
TOP·SENS
®
-SL devices.
External devices of TITANUS
TOP·SENS
®
(e.g. fan, calculator) can be
switched off with the shutdown module modules. The shutdown is made with
a monitored two-detector-dependent connection.
Spot detector spacing
Diagnostics
Choice of fan voltage
Shutdown module