WAGNER EPG-SPRINT XE, Translation Of The Original Operating Manual

Page: 4 / 80

Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
Table of Contents
4 Order number 2354913 | Edition 10/2022
6.6.2 Safety Checks 30
7 Operation 31
7.1 Training the Operating Personnel 31
7.2 Preparations for Commissioning 31
7.2.1 Tasks 31
7.2.2 Operating Modes 31
7.2.3 Gun Recognition 32
7.2.4 Manual Gun Mode with External Control 32
7.2.5 Basic and Factory Settings 32
7.3 Recipes 32
7.3.1 Double-click recipe (High Dynamic Remote) 33
7.4 Air High Output Mode (High Powder Discharge) 34
7.4.1 Combining the Air Outputs 34
7.4.2 Activating High Output Mode (C17) 35
7.5 Changing and Saving Recipes 38
7.5.1 Recipe Nos. 1 - 4 38
7.5.2 Recipe Nos. 5 - 50 38
7.6 Setting and Changing Coating Parameters 39
7.6.1 Setting the Total Air Volume 39
7.6.2 Setting the Powder Feed Quantity 40
7.6.3 Setting the Additional Air (Atomizing/Ionizing/Tribo Air Volume) 41
7.6.4 Setting the High Voltage 42
7.6.5 Displaying Actual High-voltage Value 43
7.6.6 Setting the Current Limitation 44
7.6.7 Displaying Actual Value of Current Limitation 44
7.6.8 Setting the U/I Characteristic Curves 45
7.7 Flush Function 46
7.7.1 Hose Flush Function 46
7.7.2 Cleaning Flush Function 47
7.7.3 Procedure for Cleaning Flushing with Manual Guns 47
7.7.4 Procedure for Cleaning Flushing with Automatic Guns 48
7.8 Starting Output Setting (Zero Adjustment) 48
8 Cleaning and Maintenance 51
8.1 Cleaning 51
8.1.1 Cleaning Personnel 51
8.1.2 Cleaning Procedures 51
8.2 Maintenance 51
8.2.1 Maintenance Personnel 51
8.2.2 Maintenance Instructions 52
8.2.3 Safety Checks 52
8.2.4 Maintenance Procedures 52
9 Troubleshooting and Rectification 53
9.1 Warnings E01 - E04 53
9.2 Faults 54
10 Inspections in Accordance with DIN EN 50177: 2009 58
10.1 Abbreviations 58
10.2 Overview Table 59
11 Inspections in Accordance with DIN EN 50050-2: 2013 61
11.1 Abbreviations 61
11.2 Overview Table 62