Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
14 Spare Parts
Order number 2354913 | Edition 10/2022
65
14 SPARE PARTS
14.1 HOW TO ORDER SPARE PARTS
Always supply the following information to ensure delivery of the right spare part:
Order number, designation and quantity
The quantity need not be the same as the number given in the quantity column „Stk“ on the
list. This number merely indicates how many of the respective parts are used in each
component.
The following information is also required to ensure smooth processing of your order:
– Billing address
– Delivery address
– Name of the person to be contacted in the event of any queries
– Type of delivery (normal mail, express delivery, air freight, courier etc.)
Identification in spare parts lists
Explanation of column „K“ (marking) in the following spare parts lists:
♦
Wearing parts. Wearing parts are not included in the warranty.
⋆
Included in service set
●
Not part of the standard equipment but available as a special accessory
Explanation of order no. column:
--
Item not available as spare part.
/
Position does not exist.
14.2 NOTES ON THE USE OF SPARE PARTS
DANGER
Incorrect maintenance/repair!
Danger to life and equipment damage.
4
Only a WAGNER service center or a specially trained person may carry out repairs
and replace parts.
4
Use only WAGNER original spare parts and accessories.
4
Only repair and replace parts that are listed in the spare parts chapter and that are
assigned to the device.
4
Before all work on the device and in the event of work interruptions:
4
Switch off the energy and compressed air supply.
4
Relieve spray gun and device pressure.
4
Secure the spray gun against actuation.
4
Observe the operating and service manuals of the individual components for all
work.
14.3 EPG-SPRINT XE CONTROL UNIT
Pos
K
Stk
Order no.
Designation
1
2353221
EPG-SPRINT XE control unit
♦
2
9951116
Slow-acting fuses 2.0 A (included in EPG-SPRINT XE)
