Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
7 Operation
42
Order number 2354913 | Edition 10/2022
EPG
SPRINT X
0
%
100
%
10
20
30
40
50
60
70
80
90
Ø
12
10
11
9
8
m /h
2.0
3.0
0.5
0.3
0.1
1.5
3
5.5
4.5
3.5
2.5
Tri
P_01753
19
24
35
2. The additional air volume can now be set using the universal control dial (24) between
0.05 – 4.0 m
3
/h with a resolution of 0.05 m
3
/h. The value is shown in the LED display
(19).
The [Additional air] bar graph display (35) can be found to the left of the [Additional air] push
button (21). When the control unit is in the ready position, this light strip shows the set point
as a dot and when powder feed is switched on it shows the actual value as a bar.
Different amounts of air are required depending on the type or gun and/or nozzle. For the
correct settings, please refer to the operating manual for the relevant powder spray gun.
The additional air volume can be set between 0.05 – 4 m
3
/h as described above. The
additional air cannot be fully deactivated, therefore the spray gun always receives minimal
additional air.
7.6.4 Setting the High Voltage
EPG
SPRINT X
0
%
100
%
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
10
20
30
40
50
60
70
80
90
Ø
12
10
11
9
8
m /h
2.0
3.0
0.5
0.3
0.1
1.5
3
5.5
4.5
3.5
2.5
Tri
µA
P_04711
28
27
1. Press the [High-voltage] push button (27) to adjust the high voltage. The yellow LED
(28) indicates that high voltage is selected.
