Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
5 Description
Order number 2354913 | Edition 10/2022
19
Pneumatic:
Input air pressure
0.6 – 0.8 MPa; 6 – 8 bar; 87 – 116 psi
Air flow
maximum 15 m
3
/h
Sum of dosing and feed air
1 – 6 m
3
/h
Gun air
0.05 – 4.0 m
3
/h
Required compressed air quality as per
ISO 8573.1
6.5.2
Connection hose diameter
8 mm; 0.315 inch
Ambient conditions:
Operating temperature range
5 – 40 °C; 41 – 104 °F
WARNING
Exhaust air containing oil!
Risk of poisoning if inhaled.
Insufficient paint application quality.
4
The compressed air must meet the following quality requirements: (Quality
Standard 6.5.2 according to ISO 8573.1, 2010) 6.5.2 = particle density ≤ 5 mg/m³;
pressure dew point ≤ +7 °C; oil content ≤ 0.1 mg/m³
NOTICE
Compressed air quality, accessories
Danger of damage to the device.
4
Operate the control unit only with the prescribed compressed air quality.
4
Only use the control unit with original WAGNER accessories.
4
Non-observance of these conditions results in the warranty expiring.
Ambient conditions:
When using low-melting powder varieties, an ambient temperature below 30 °C (86 °F) may
be necessary.
Volume measures:
for volumes specified in Nm
3
(standard cubic meters). One cubic meter of gas at 0 °C and
1.013 bar is referred to as a normal cubic meter.
