WAGNER EPG-SPRINT XE, Translation Of The Original Operating Manual

Page: 76 / 80

Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
16 Appendix Device Configuration
76 Order number 2354913 | Edition 10/2022
Parameter Value Description
C22 Hose flushing (dosing air with-
out feed air) OFF
(factory setting) Hose flushing switched off.
1 s - 10 s Hose flushing after-run time in seconds.
C23 Hose flushing intensity of dos-
ing air 100%
(factory setting) Hose flushing intensity 100%.
1% – 100% Hose flushing intensity from 1% to 100%.
C25 Tribo current minimum moni-
toring OFF
(factory setting) Tribo current is not monitored.
0.1 μ A – 5 μ A If the Tribo current does not reach the set
values for more than 10 seconds, a warn-
ing is issued (see Warnings and Fault Mes-
sages).
C26 Manual gun with external
control operating mode OFF
(factory setting) Standard function. The device automati-
cally recognizes the manual or automatic
gun. The properties of the corresponding
manual or automatic gun operating mode
are described in the Chapter on Prepara-
tions for Commissioning [
8
31] and in the
service manuals.
1 Operation always with manual gun. The
remote interface is not used for control-
ling the vibrator, instead the remote inter-
face provides the device with a release
and the OFF-ON command for cleaning
(continuous flushing). The remote inter-
face is described in the service manuals.
2 Same as described for value 1, but the
flush button at the operating front is with-
out function (disabled).
3 Manual gun mode together with the su-
perordinate WSC controller.
Communication between EPG-Sprint and
superordinate controller via special RS-422
cable and protocol.
The control is primarily designed for oper-
ation in an IPS system.
The flushing button on the EPG-Sprint is
not blocked.
4
(factory setting IPS) The same as with value 3, but the flushing
button is blocked.
C31 – C40 Password protection Password-protected; only for WAGNER
personnel or appropriately trained per-
sons.
C41 – C99 Password protection Password-protected; only for WAGNER
production sites or the WAGNER service
center with appropriate test equipment.