Operating manual Universal Control Unit for Powder Spray Guns EPG-SPRINT XE
16 Appendix Device Configuration
Order number 2354913 | Edition 10/2022
69
4. The LED display (19) now shows the first configuration setting C11. At the same time,
the two yellow LED displays [High voltage] (28) and [Spray current] (30) will flash.
For ease of operation the configuration settings are divided into 4 groups. The first two
groups are for the end user, the third group is for WAGNER service department and the
fourth group is reserved for WAGNER production sites or the WAGNER service center, which
have the necessary infrastructure.
2x
2x
P_01750
5
6
7
8
5
Group 1: Parameters C11 to C20
6
Group 2: Parameters C21 to C30
7
Group 3: Parameters C31 to C40 (WAGNER service department)
8
Group 4: Parameters C41 to C99 (production plant; service center)
It is possible to switch between the different groups using the [Recipe] buttons 5, 6, 7 and 8.
16.1 SETTING EXAMPLE: PARAMETER C11
This parameter is used to set the gun type (Tribo or Corona). The control unit is factory-set to
Corona [cor].
EPG
SPRINT X
0
%
kV
80
60
40
20
100
Tri
Cor
5
4
3
2
1
120
80
40
20
10
2.0
µA
P_05024
5
27
29
1. If parameter C11 is not set on the control unit, select parameter group 1 by pressing
recipe button (5) and use the [High-voltage] button (27) and the [Current limitation]
button (29) to set the parameter to C11.
