W6 WERTARBEIT N 656D Free Arm Manual Download Page 70

Page: 70 / 102

4. ORANGE thread path (threading the left needle)

Threading

Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR

Turn the hand wheel forwards (towards you) until the needles are in the
top-most position.

10.

Using the threading aid, thread the orange thread through the eye of the

left-hand sewing needle.

You can also thread the orange thread with the aid of tweezers.

11.

Guide the orange thread between the metal needle plate and the presser
foot by about 15 cm to the left.

The orange thread is threaded

W6 Tip

W6 WERTARBEIT

also

offers

a helpful video for the threading procedure

on its website for free.

Please access our website using www.w6-

wertarbeit.eu and select “Help” / W6 N 656D Free Arm
Criteria for the optimal threading of a W6 N 656D Free Arm“ (4 min. video).

Summary of Contents for WERTARBEIT N 656D Free Arm







































































































Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands

W6 WERTARBEIT N 656D Free Arm, Manual

Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands