After sewing
Safety
instructions
7
Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR
1.3
After sewing
Please perform the following task
s
after sewing:
•
Clean the overlocker and remove all dust, small pieces of thread and
lint.
•
Switch off the overlocker.
•
Always unplug the
‹power plug›
.
•
Store the overlocker in such a way that it cannot fall.
•
Always place the overlocker out of the reach of children and
animals.
•
Exchange needles regularly. Worn or damaged needles pose a hazard.
1.4
Tips for a
long service life
To ensure a long service life, take note of the following
instructions
:
•
Do not expose the overlocker to direct sunlight, moisture or high levels
of humidity.
•
Clean and oil your overlocker at regular intervals. Perform these tasks
thoroughly and at least once a year
or more frequently if the device is in
frequent use.
•
Clean the overlocker using a dry or damp cloth only.
•
Never use benzine, thinners or other chemical agents for cleaning
the
overlocker
.
•
Do not subject the overlocker to strong vibrations.
•
The overlocker is not designed for commercial use.
•
Have the overlocker
inspected by a W6 workshop (this may result in
additional
costs).
•
Frequent sewers should send the overlocker in for an annual inspection
,
while an inspection every 2 to 4 years should be sufficient for normal
use.
To do so, contact W6 WERTARBEIT directly by email: info@w6-wertar-
beit.com.
