W6 WERTARBEIT N 656D Free Arm Manual Download Page 8

Page: 8 / 102

What we expect from you

Safety

instructions

Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR

1.5

What we expect from you

Specific knowledge and skills are required

for

working with thi

device.

•

You should be confident working with the overlocker.

•

You should have read and understood this manual.

•

Always have a clear head when working with the overlocker.

•

Never work with the overlocker when under the influence of alcohol or
drugs.

•

Take note of the package insert when taking medication.

•

If you are pregnant,

have someone help you with

assembling and

moving

the overlocker.

•

Do not attempt to dismantle the overlocker, this should only be done

by a trained specialist, but keep in mind that you do need to carry out

the basic maintenance yourself.

•

You are personally suited to operate the overlocker.

•

In case of doubt,

please

contact

our Service Department by e-mail at

[email protected]

•

Only allow an authorised workshop

to work on electrical components.

W6 WERTARBEIT

also

offers the following options on its website for free.

Please access our website using www.w6-wertarbeit.eu and select
“HELP”.

•

Criteria for the optimal threading of a W6 N 656D Free Arm (4-min.

video).

•

A tutorial video

made

specifically for the W6 N 656D Free Arm.

•

Tips and tricks for the W6 N 656D Free Arm.

•

A visual selection of stitches and their use.

Summary of Contents for WERTARBEIT N 656D Free Arm







































































































Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands

W6 WERTARBEIT N 656D Free Arm, Manual

Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands