W6 WERTARBEIT N 656D Free Arm Manual Download Page 36

Page: 36 / 102

Checking needles

Changing needles

Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR

Changing needles

In this chapter you will find information regarding the replacement of
needles:

•

Checking needles (

age

36)

•

Removing needles (

age

37)

•

Inserting a needle (

age

38)

If needle, fabric and thread are

all compatible with one another,

your

overlocker will sew smoothly. An unsuitable needle forces the thread
through the fabric instead of allowing it to glide through smoothly. This
results in thread breakage, damaged sewing thread or the overlocker
skipping stitches.

CAUTION

►

For

for your own saftey

, always use original W6 WERTARBEIT

needles in

combination with thread tension-friendly and lint-free W6

thread.

7.1

Checking needles

Safety instruction: Use of needles

Use only W6 WERTARBEIT ELx705

ize 80 needles for this overlocker.

Never use standard household needles.
Never use bent or worn needles.
Never use needles with bent or worn

tips

CAUTION

Risk of injury posed by breaking needles

Worn or damaged needles can break and damage the overlocker. There
is a risk of injury posed by uncontrolled moving parts.

►

Change worn or damaged needles.

Checking the needle. Top: straight; bottom: bent

Summary of Contents for WERTARBEIT N 656D Free Arm







































































































Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands

W6 WERTARBEIT N 656D Free Arm, Manual

Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands