W6 WERTARBEIT N 656D Free Arm Manual Download Page 13

Page: 13 / 102

Assembling your

verlocker

Assembling

your

verlocker

Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR

Set the

‹on and off switch›

to the “

“ (ON) position.

▼

The overlocker is switched on.

▼

The lighting is switched on.

The work light of the overlocker does not light up?

The LED (light-emitting diode) may be damaged.

►

Contact the W6 WERTARBEIT Support Department using the
contact form on our website.

The overlocker does not sew?

The overlocker is not connected correctly.

►

Switch the overlocker off again.

►

Check all plug connections.

Slowly press the

‹foot controller›

to start sewing.

The further the foot controller is pressed, the faster the overlocker

sews.

Release the foot controller, when you wish to stop sewing.

10.

Set the

‹on and off switch›

to the “

” (OFF), to switch off the

overlocker.

The

overlocker is now connected and ready for

operation.

W6 Tip

The waste bin is only installed once the four threads have been

threaded.

Summary of Contents for WERTARBEIT N 656D Free Arm







































































































Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands

W6 WERTARBEIT N 656D Free Arm, Manual

Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands