W6 WERTARBEIT N 656D Free Arm Manual Download Page 42

Page: 42 / 102

Bringing the upper knife to the working position

Adjusting the upper knife

Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR

8.2

Bringing the upper knife to the working

position

Please follow the steps below:

Open the front cover, see

Operating elements“ >

Opening and closing

the front cover“ (

age

24)

Using your left hand, press the upper knife holder to the right up to the
stop.

While pressing the holder with your left hand, use your right hand to turn
the knob of the upper knife holder forwards (towards you) until it locks
vertically in the working position.

The upper knife is in the working position

Summary of Contents for WERTARBEIT N 656D Free Arm







































































































Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands

W6 WERTARBEIT N 656D Free Arm, Manual

Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands