W6 WERTARBEIT N 656D Free Arm Manual Download Page 72

Page: 72 / 102

Using the threading aid

Threading

Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR

Place the thread in the notch at the tip of the threading aid.

Position the threading aid with the thread in front of the eye of the needle
and press carefully against the needle.

In doing so, a small metal pin pushes the thread through the eye of
the needle. A loop is formed.

Catch hold of the thread loop and pull the end of the thread through the
eye of the needle.
Attention: Please handle the threading aid with care. A damaged thread-
ing aid

is not covered by warranty.

The thread is threaded through the eye of the needle

W6 Tip

W6 WERTARBEIT

also

offers

a helpful video for the threading process

its website for free.
Please access our website using www.w6-wertarbeit.eu and select

Help /

W6 N 656D Free Arm

: Optimal threading (4 min. video)

Summary of Contents for WERTARBEIT N 656D Free Arm







































































































Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands

W6 WERTARBEIT N 656D Free Arm, Manual

Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands