W6 WERTARBEIT N 656D Free Arm Manual Download Page 19

Page: 19 / 102

Using thicker decorative yarn (special thread guide)

Getting to know your

verlocker

Manual • Overlock W6 N 656D Free Arm • 06/03/2019 • 1.0 • GBR

3.6

Using thicker decorative yarn (special

thread guide)

Please use the special thread guide in combination with the red and green
threading path.

Assembling the special thread guide

Assembling the special thread guide:

Insert the special thread guide to the left and to the right of the metal
plates (

ed and green threading path)

Threading the decorative yarns:

Thread directly from the thread guide bar through the left and right circular
holes of the special thread guide.

ATTENTION:

Please don‘t thread the decorative yarn through the metal plates. Use the
special thread guide instead.

Summary of Contents for WERTARBEIT N 656D Free Arm







































































































Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands

W6 WERTARBEIT N 656D Free Arm, Manual

Search results

Summary of Contents for WERTARBEIT N 656D Free Arm

Reviews:

Related manuals for WERTARBEIT N 656D Free Arm

Brands by name

Popular brands