Vodavi STARPLUS Triad XTS, Installation Manual

Page: 115 / 138

Maintenance Access 4-13
Chapter 4 - Maintenance and Troubleshooting
System Configuration
This illustratration shows the configuration of the XTS System when the installer types
d<space>s at the maint > prompt.
Figure 4-2: Remote Maintenance - System Configuration
CAB Shows the cabinet number for each board installed.
SLOT Shows the slot position where each board is installed.
CARD Identifies the type of board.
CKTS Identifies the amount of circuits associated with the board.
SERV STAT
† Out-of-Service (OOS) status can indicate the entire card is out of service, or a
specific station is not installed or installed but not operational.
† In-Service ( INS) status can indicate a specific station is installed and operating
correctly.
BRD OPTS Lists any optional boards being used by the system.
FW VER. Identifies the firmware version of each board.
maint>d s
CAB/SLOT CARD CKTS SERV STAT BRD OPTS FW VER.
--------- ---- ---- ----------- ---------- ---------
0 0 DT24 24 INS 0 00-0
0 1 DTIB 12 INS 0 00-0
0 2 T1IB 24 INS 0 10F-0
0 3 PRIB 24 OOS 0 10C-0
0 4 SLIB 6 INS 0 00-0
0 5 LCOB 6 INS 0 00-0
0 6 LCOB 6 INS 0 00-0
0 7 DIDB 4 INS 0 00-0
0 9 MPB 0 INS V300 Eng. Vx.xx Pxx
Station Count 42 Coline Count 63
maint>