Vodavi STARPLUS Triad XTS, Installation Manual

Page: 40 / 138

3-6 KSU Installation
Chapter 3 - System Installation
The Cabinet is mounted with four #10 or larger, 1 ½ inch or longer screws.
1. Drill pilot holes in the locations marked, insert the screws and tighten, leaving about ½
inch exposed.
2. Mount the Cabinet on the screws and tighten the screws securely.
Figure 3-2: Mounting XTS Cabinet
Mounting Cabinet 1 and Cabinet 2
The optional Cabinets include a metal housing designed for wall mount installation. Cabinet
1 is mounted above Cabinet 0 and Cabinet 2 is mounted above Cabinet 1.
1. Before mounting the optional Cabinets, remove the Interconnection Cover on the top
right side of Cabinet 0 and Cabinet 1 and on the bottom of Cabinet 1 and Cabinet 2.
2. Mount the optional Cabinet on the screws and tighten the screws securely.
3. Mount the 4 side brackets between the Cabinets.
4. Interconnection is achieved via a amphenol type connector. No cable is used to connect
the Cabinets together. Refer to Figure 3-3 .