Vodavi STARPLUS Triad XTS, Installation Manual

Page: 74 / 138

3-40 CO/PBX Connections
Chapter 3 - System Installation
The clock cable should be connected to the OUT position on the connector on the PRIB1. The
clock cable should be connected to the IN position on PRIB2. SW2 of the PRIB1 and PRIB2
should be placed in the ON position. The three T1IBs are not connected with the clock control
cable and SW3 on these boards should be in the OFF position.
(3) T1IBs and (2) PRIBs
The clock cable should be connected to the OUT position on the cable connector on the T1IB
and connected to the IN position on the connector on the T1IB2.
The clock cable should be connected to the OUT position on T1IB2 and connected to the IN
position on the T1IB3. SW3 of T1IB1 should be placed in the ON position, with SW3 on T1IB2
and T1IB3 being OFF. The two PRIBs are not connected with clock control cables, and SW2 on
the PRIBs should be in the OFF position.
(3) PRIBs and (2) BRIBs
The clock cable should be connected from the OUT position of the PRIB1 to the IN connectors
of all the cards and all clock switches should be in the ON position.
T1IB1 T1IB2 T1IB3 PRIB1 PRIB2
SW3 On SW3 Off SW3 Off SW2 Off SW2 Off
PRIB1 PRIB2 PRIB3 BRIB1 BRIB2
SW2 On SW2 On SW2 On Switch 4, SW2 On Switch 4, SW2 On