Vodavi STARPLUS Triad XTS, Installation Manual

Page: 124 / 138

4-22 Flash ROM Software Update
Chapter 4 - Maintenance and Troubleshooting
5. Type the remote admin password ( 3226vodavi = default password), then press <Enter>.
The following command options and system prompt will display:
6. Type u and press <Enter>. The following messages will display:
7. Type y to start the Flash ROM update. The following message will display:
8. Use one of the following methods to set the file location and protocol.
For Hyper Terminal :
a. Use the “transfer” panel to select the “send file” option
b. Then select the object code file to be uploaded to the XTS .
c. Select the “Zmodem” protocol, then click “Send”.
-or-
For ECOM :
a. Use the “files” panel to select the “upload” option.
b. Then select the “Zmodem” upload protocol and click “OK”.
c.
Select the object code file to be uploaded to the XTS , then click “OK”.
XTS
will not echo the password.
COMMAND DESCRIPTION
____________________
b
show baud rate
d download software using zmodem
s bank switching
u upload software using zmodem
x Ex i t
? or h Help, Guide
maint>swupdown>
DRAM is not installed...
Software Upload without DRAM module is initiated...
SRAM (512 K-bytes) allocation succeeded...
Software in bank 1 will be erased now...
Please, wait...
Bank 1 erasure is completed...
Please, start Z-modem transfer...
Upload with baud rate [19200 bps]
To continue, please type Yes [y], or No [n]:
Upload file with zmodem...