Vodavi STARPLUS Triad XTS, Installation Manual

Page: 125 / 138

Flash ROM Software Update 4-23
Chapter 4 - Maintenance and Troubleshooting
After the upload is complete, the following messages will display:
9. Type y to switch the banks of Flash ROM now, or type n if you wish to switch at a later
time. If “y” is selected, the following messages will display:
After the software is switched successfully, the XTS system will restart automatically.
To switch to the new software at a later time:
1. Connect a terminal to I/O Port 1 on the MPB. The following is an example of the data that
will display:
2. Type the password config and press <Enter>. The following prompt will display:
3. Type u to select the “upload/download flash rom software” option. The following
password prompt will display:
4. Type the remote admin password ( 3226vodavi = default password), then press <Enter>.
XTS
will not echo the password.
Upload succeeded!
Please, wait until bank data programming is finished...
Z-modem transfer completed...
Uploaded software lies in bank 1...
Do you want to switch the banks of flash ROM now (y/n)?
Bank 0 has valid software key...
Bank 1 has valid software key...
SRAM (256 K-bytes) allocation succeeded...
SRAM 92 bytes) allocation succeeded...
Please, wait until bank switching is finished and
system is reset automatically...
After reset, banks would be switched as requested...
300 Digital Hybrid Key System
Eng. V1.00 P01-FFFF DATE:10/20/01 TIME: 11:10:27
ENTER PASSWORD:
maint>
Enter password>