6-16
Station Programming
Drop Time-Out
Similar to Warning Tone above, Drop Time-Out may be applied to any station where
outgoing call length is to be restricted. When set to Y this station will receive a warning
tone over the connected voice path when the Warning Time (refer to
Call Handling
Configuration
) has expired, and 10 sec later the current call will be terminated.
Default
DHS/DHS-E
Drop Time-Out is set to N (NO) for all stations.
Related Programming
Refer to
“Warning Time”
in the
Call Handling Configuration
section of this Chapter.
Station Position
Station numbering can be changed for any Station Port between the system allowable
range. If the current assigned station number is not desired or must be changed, the
programmer may select any of the available station directory numbers to reassign this
port.
Default
For
DHS
ports (1-24) the B1 channel is 10-33, and the B2 channel is 58-81. For
DHS-E
ports
(1-48) the B1 channel is 100-147, and the B2 channel is 148-195. The
DHS
range is from
10-81, and the
DHS-E
range is from 100-195.
Voice Mail Port
Single Line Telephone ports that are to be used for connection to a Voice Mail system
must be assigned type VM to provide longer DTMF tones. This identifies the port to the
system software for special handling.
Default
DHS/DHS-E
Single Line Telephone ports are set to N (NO), not assigned as a VM port.
DSS Owner
When programming a DSS owner, enter programming mode for the station where the
DSS console resides. Then specify the key telephone station that will serve as its owner.
Default
The
DHS
station range is from 10-81, and the
DHS-E
station range is from 100-195.
Summary of Contents for Starplus DHS
