Vodavi Starplus DHS, Technical Manual

Page: 276 / 338

Call Handling Configuration 6-27
The ABR ATTEMPTS determines how many attempts will be made to reach a busy
number before the system aborts the feature. The ABR INTERVAL determines how often
attempts are made (time between attempts).
Default
The default settings for the DHS/DHS-E three ABR data fields are listed below:
†
ABR Attempts = 10 (no attempt = 0)
†
ABR Interval = 16 sec
†
TONE DET. TIME = 4
The programmable range of ABR data fields are listed below:
†
ABR Attempts = 0-10
†
ABR Interval=16/30/60/90/120 sec
†
TONE DET. TIME = 0-9
Call Abandon Time
Call Abandon Time is set for 2 modes ACTIVE CALL and HELD CALL. This time represents
the minimum interruption in loop current during these modes of operation that must be
detected to force a CO line on-hook. Any CO line marked Call Abandon Y will follow the
associated timer programming.
Default
The DHS/DHS-E ACTIVE CALL and HELD CALL fields are both set for 600 msec, and the
variable range for both is 50 - 2500 msec.
Ring ALT Position
One station may be assigned as the alternate attendant position. CO calls that go
unanswered at the attendant assigned telephone will ring at the Alternate Position
following expiration of this timer.
Default
The DHS/DHS-E Ring Alternate Position Timer is set for 30 sec, and is variable from 30/60/
90/120/150/180 sec.
Related Programming
Refer to “Alternate Attendant” in the Resource Configuration section of this Chapter.
CO Line Preset Forward
Description
Each CO line in the system may be pre-programmed for a specific forward destination.
CO Line Preset Call Forward is similar to No Answer forward operation in that a timer (CO
P-FWD TIME) is preset for all CO lines marked for this forward. When a CO line rings into
the system the timer is started, if the timer expires before the call is answered the
designated preset forward destination begins to ring in addition to other programmed
ringing locations.