Vodavi Starplus DHS, Technical Manual

Page: 239 / 338

5-12 Hot Line (Ring Down)
Hot Line (Ring Down)
Description
This feature allows you to use the associated single line telephone (SLT) port for
automatic signaling to a predetermined destination. When the feature is enabled, the
destination will be signaled whenever that SLT goes off-hook. You may hook-flash at the
SLT where the feature is enabled so that you can request intercom dial tone to perform
other functions and change or disable the feature when no delay time is programmed.
You can set up the Hot Line feature to call another Telephone, Hunt/Voice Mail Group,
Paging Zone, CO line or CO line Group.
Operation
To program the Hot Line feature ( DHS ):
1. Lift the handset
2. Dial [#] + [#] + [4]
3. Dial the delay time (1-9) seconds.
4. Dial the destination code. You may choose from the following:
[#] + [500] (Internal All Call Paging)
[#] + [501] (External Paging)
[#] + [502] (System All Call Paging)
[#] + [503] + [n] (Internal Paging by station group where n = station group 1-8)
[
✳
] + [1] + [nn] (nn = speed dial bin 00-99)
[
✳
] + [3] + [n] (n = the CO line number (1-9), 0, [
✳
], [#])
[
✳
] + [4] + [n] (n = the CO line group number or 0 if any group
DHS [10-89] (Station/Hunt Group number)
To program the Hot Line feature ( DHS-E ):
1. Lift the handset
2. Dial [#] + [#] + [4]
3. Dial the delay time (0-9) seconds.
4. Dial the destination code. You may choose from the following:
[#] + [500] (Internal All Call Paging)
[#] + [501] (External Paging)
[#] + [502] (System All Call Paging)
[#] + [503] + [n] (Internal Paging by station group where n = station group 1-8)
[
✳
] + [1] + [nn] (nn = speed dial bin 00-99)
[
✳
] + [3] + [nnn] (nnn = the CO line number (1-9), 0, [
✳
], [#])
[
✳
] + [4] + [nnn] (nnn = the CO line group number or 0 if any group)
DHS-E [800-807] (Station/Hunt Group number)