Vodavi Starplus DHS, Technical Manual

Page: 47 / 338

2-24 Preparation for DHS Installation
†
Six conductor modular jack assemblies for all station instruments (recommended).
†
Standard punch-down terminal block(s), 66M1-50 type, as required.
†
Industry-standard, 25-pair cable(s) with a 50-pin male amphenol/AMP type
connector for connection from each equipped 3 x 8 module to the MDF.
†
AC voltage surge/spike protector.
†
Standard telephone hand tools and mounting hardware for the KSU, MDF backboard,
punch-down terminal block(s), modular jack assemblies for CO lines, etc.
Some additional tools suggested to have on-hand when installing the DHS system
include:
†
1 box 4 pairCat3 orCat5 twisted pair
†
Drywall screws
†
Multi-meter (fluke)
† 25 pair Amp cables (male-female) † Electrical tape † Permanent marker (0.8 mm,
0.5 mm for certain
applications)
†
25 pair Cat3 cable
†
Extension cord (three-
prong with ground)
†
Phillips head screwdrivers:
#1 x 4
#2 x 4
#2 x 6
† 89B-Brackets † Fiber rod for fishing walls † Phone jacks
† B splice connectors or Scothlok
TM
splicing connectors
† Fish tape † Punch Down Tool (110 and
66 Block Blades)
† Bridge clips † Harmonica adapter † RJ11 plugs
† Butt set (T.S. if possible) † In-line adapter † RJ45 plugs
† Chain for fishing walls † Ladder † Standard screwdrivers:
1/8 x 4 in.
1/4 x 4 in.
3/16 x 6 in.
5/32 x 4 in.
†
Computer with RS232
†
Level
†
Static/Ground Strap
† Cordless drill † Linesmen scissors † Toner
† Diagonal wire cutters † Long nose pliers † Wand (Induction Amp)
†
Digit grabber
†
M1-66 split blocks
†
Wire spools
† Drill † Modular crimping tool
(RJ-11 and RJ-45) † Yellow 77 (lubricant for wire)