3-16
DHS-E Installation
Six conductor modular jack assemblies for all station instruments (recommended).
Standard punch-down terminal block(s), 66M1-50 type, as required.
Industry-standard, 25-pair cable(s) with a 50-pin male amphenol/AMP type
connector for connection from each equipped 3 x 8 module to the MDF.
AC voltage surge/spike protector.
Standard telephone hand tools and mounting hardware for the KSU, MDF backboard,
punch-down terminal block(s), modular jack assemblies for CO lines, etc.
Some additional tools suggested to have on-hand when installing the
DHS-E
system
include:
Verify On-Site Equipment
Once the equipment installation site is identified and a dedicated AC outlet, earth
ground, adequate lighting and ventilation are available, verify that all equipment
required is on-site and was not damaged during shipping:
Unpacking the KSU - The Key Service Unit is shipped in its own protective carton and
contains the following:
Basic KSU
One mounting template
One System Installation & Maintenance Manual
Open the carton and verify that all items are complete and undamaged. Remove all
packing material and store for future use in the event that return shipment is
required. This should be performed at the installer’s office with a 48-hour burn-in
period prior to installation.
1 box 4 pairCat3 orCat5 twisted pair
Drywall screws
Multi-meter (fluke)
25 pair Amp cables (male-female)
Electrical tape
Permanent marker (0.8 mm,
0.5 mm for certain
applications)
25 pair Cat3 cable
Extension cord (three-
prong with ground)
Phillips head screwdrivers:
#1 x 4
#2 x 4
#2 x 6
89B-Brackets
Fiber rod for fishing walls
Phone jacks
B splice connectors or Scothlok
TM
splicing connectors
Fish tape
Punch Down Tool (110 and
66 Block Blades)
Bridge clips
Harmonica adapter
RJ11 plugs
Butt set (T.S. if possible)
In-line adapter
RJ45 plugs
Chain for fishing walls
Ladder
Standard screwdrivers:
1/8 x 4 in.
1/4 x 4 in.
3/16 x 6 in.
5/32 x 4 in.
Computer with RS232
Level
Static/Ground Strap
Cordless drill
Linesmen scissors
Toner
Diagonal wire cutters
Long nose pliers
Wand (Induction Amp)
Digit grabber
M1-66 split blocks
Wire spools
Drill
Modular crimping tool
(RJ-11 and RJ-45)
Yellow 77 (lubricant for wire)
Summary of Contents for Starplus DHS
