manualshive.com logo in svg

VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual

The VMware VS4-ENT-PL-A - vSphere Enterprise Plus is a powerful virtualization software suite. Maximize your data center's capabilities with this cutting-edge product. For a hassle-free setup, easily download the user manual for free from manualshive.com. Get the most out of your VMware experience with this comprehensive manual.

Share
Download
background image

Format for the vCenter Server Appliance Configuration File

When you deploy a new vCenter Server Appliance, you can configure the appliance by uploading a

configuration file, instead of entering the settings manually in the vCenter Server Setup wizard.

Configuration File Format

Each line of the configuration file supplies the setting for the corresponding entry in the vCenter Center

Setup wizard. The values shown here are variables that describe acceptable entries.

N

OTE

   You must enter the header exactly as shown below: 

vCenter Server Preseed Config v1.0

.

Otherwise, the file will be rejected.
Passwords in the configuration file are not used. You must enter passwords manually when you complete

the vCenter Setup wizard.

#vCenter Server Preseed Config v1.0

#Database options
VC_DB_TYPE=embedded or oracle
#Additional database options if VC_DB_TYPE=oracle
VC_DB_SERVER=vCenter Server database server IP address
VC_DB_SERVER_PORT=vCenter Server database server port number
VC_DB_INSTANCE=vCenter Server database server instance name
VC_DB_USER=vCenter Server database user name
VC_DB_PASSWORD=

#vCenter Single Sign-On options
SSO_TYPE=embedded or external
#Additional vCenter Single Sign-On options if SSO_TYPE=external
SSO_LS_LOCATION=vCenter Single Sign-On Lookup Service URL
SSO_LS_CERT_THUMBPRINT=vCenter Single Sign-On Lookup Service certificate thumbprint

SSO_REG_ADMIN_USERNAME=fully qualified name of a user with vCenter Single Sign-On administrative 
privileges
SSO_REG_ADMIN_PASSWORD=password for above user with vCenter Single Sign-On administrative 
privileges
SSO_VC_ADMIN_USERNAME=name of the default principal administrator for vCenter Server. If not 
qualified, it is
assumed to be an Operating System principal
SSO_VC_ADMIN_IS_GROUP=true or false. True if above default principal administrator for vCenter 
Server is a group.
#Additional vCenter Single Sign-On options if SSO_TYPE=embedded
SSO_ADMIN_PASS=password for the [email protected] newly installed embedded vCenter 
Single Sign-On service
SSO_ADMIN_PASS2=set to the same string as SSO_ADMIN_PASS
SSO_CALLTYPE=set to "typed" for SSO_ADMIN_PASS to take effect.

#Microsoft Active Directory options
VC_AD_STATUS=0 to disable, 1 to enable
#Additional Microsoft Active Directory option if VC_AD_STATUS=1
VC_AD_DOMAIN=Active Directory fully qualified domain name

vSphere Installation and Setup

98 

 VMware, Inc.

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Reviews:

No comments

Related manuals for VS4-ENT-PL-A - vSphere Enterprise Plus

Yamaha HUB Owner'S Manual preview
HUB
Brand: Yamaha Pages: 43
ADS Technologies ADS INSTANT MUSIC Quick Start Manual preview
ADS INSTANT MUSIC
Brand: ADS Technologies Pages: 5
Adobe CAPTIVATE 2 Use Manual preview
CAPTIVATE 2
Brand: Adobe Pages: 306
Partec ParaStation5 Administrator'S Manual preview
ParaStation5
Brand: Partec Pages: 98
Red Hat JBoss Developer Studio 3.0 User Reference Manual preview
JBoss Developer Studio 3.0
Brand: Red Hat Pages: 78
Altigen AltiContact Manager Version 5.0 Administration Manual preview
AltiContact Manager Version 5.0
Brand: Altigen Pages: 542
Hitachi Universal Storage Platform VM Installation Planning Manual preview
Universal Storage Platform VM
Brand: Hitachi Pages: 62
Hitachi Universal Storage Platform V Reference Manual preview
Universal Storage Platform V
Brand: Hitachi Pages: 102
Hitachi MK-96RD626-07 User Manual preview
MK-96RD626-07
Brand: Hitachi Pages: 205
Red Hat DEVICE-MAPPER MULTIPATH 5.2 Configuration And Administration Manual preview
DEVICE-MAPPER MULTIPATH 5.2
Brand: Red Hat Pages: 44
Red Hat CLUSTER SUITE FOR ENTERPRISE LINUX 5.2 Overview preview
CLUSTER SUITE FOR ENTERPRISE LINUX 5.2
Brand: Red Hat Pages: 78
Pfaff CREATIVE 4D EXPRESS MONOGRAM WIZARD Brochure preview
CREATIVE 4D EXPRESS MONOGRAM WIZARD
Brand: Pfaff Pages: 2
Nordic Messaging Technologies XFAX User Manual preview
XFAX
Brand: Nordic Messaging Technologies Pages: 62
IBM TIVOLI SC32-0129-00 User Manual preview
TIVOLI SC32-0129-00
Brand: IBM Pages: 82
TANDBERG MOVI 4.0 - FOR MAC User Manual preview
MOVI 4.0 - FOR MAC
Brand: TANDBERG Pages: 19
Acer CoPilot Pocket PC6 User Manual preview
CoPilot Pocket PC6
Brand: Acer Pages: 48
Harman Kardon SIGNATURE 2.0 Instruction & Operation Manual preview
SIGNATURE 2.0
Brand: Harman Kardon Pages: 19
Canon Powershot S2 IS - Powershot S2 IS 5MP Digital... User Manual preview
Powershot S2 IS - Powershot S2 IS 5MP Digital...
Brand: Canon Pages: 137

Brands by name

Popular brands

Load more brands