manualshive.com logo in svg

VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual, Page: 153 / 276

Share
Download
VMware VS4-ENT-PL-A - vSphere Enterprise Plus Setup Manual Download Page 153

=[true|false]

%firstboot

Creates an 

init

 script that runs only during the first boot. The script has no effect on subsequent boots. If

multiple 

%firstboot

 sections are specified, they run in the order that they appear in the kickstart file.

N

OTE

   You cannot check the semantics of 

%firstboot

 scripts until the system is booting for the first time. A

%firstboot

 script might contain potentially catastrophic errors that are not exposed until after the

installation is complete.

--interpreter

=[python|busybox]

Specifies an interpreter to use. The default is busybox.

N

OTE

   You cannot check the semantics of the 

%firstboot

 script until the system boots for the first time. If the

script contains errors, they are not exposed until after the installation is complete.

Differences Between ESXi 4.x and ESXi 5.x Scripted Installation and Upgrade
Commands

Before you perform a scripted ESXi installation or upgrade, if you are familiar with ESXi version 4.x scripted

installation, note the differences between ESXi 4.x and ESXi 5.x scripted installation and upgrade

commands.
In ESXi 5.x, because the installation image is loaded directly into the host RAM when the host boots, you do

not need to include the location of the installation media in the installation script.
ESXi 5.x supports scripted upgrades in addition to scripted installation.
Command differences are noted in the following summary.

accepteula

 or

vmaccepteula

Only in ESXi

autopart

Deprecated and replaced with 

install

, 

upgrade

, or 

installorupgrade.

auth

 or 

authconfig

Not supported in ESXi 5.x.

bootloader

Not supported in ESXi 5.x.

esxlocation

Deprecated and unused in ESXi.

firewall

Not supported in ESXi 5.x.

firewallport

Not supported in ESXi 5.x.

install

,

installorupgrade

,

upgrade

These commands replace the deprecated autopart command. Use one of

these command to specify the disk to partition, and the 

part

 command to

create the vmfs datastore. 

installorupgrade

 and 

upgrade

 are newly

supported in ESXi 5.x.

serialnum

Deprecated in ESXi 5.0.x. Supported in ESXi 5.1.

vmserialnum

Deprecated in ESXi 5.0.x. Supported in ESXi 5.1.

timezone

Not supported in ESXi 5.x.

virtualdisk

Not supported in ESXi 5.x.

zerombr

Not supported in ESXi 5.x.

Chapter 7 Installing ESXi

VMware, Inc. 

 153

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Reviews:

No comments