manualshive.com logo in svg

VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual, Page: 258 / 276

Share
Download
VMware VS4-ENT-PL-A - vSphere Enterprise Plus Setup Manual Download Page 258

2

Press F11 to confirm.

Restoring the Standard Switch

A vSphere Distributed Switch functions as a single virtual switch across all associated hosts. Virtual

machines can maintain a consistent network configuration as they migrate across multiple hosts. If you

migrate an existing standard switch, or virtual adapter, to a Distributed Switch and the Distributed Switch

becomes unnecessary or stops functioning, you can restore the standard switch to ensure that the host

remains accessible.
When you restore the standard switch, a new virtual adapter is created and the management network

uplink that is currently connected to Distributed Switch is migrated to the new virtual switch.
You might need to restore the standard switch for the following reasons:

n

The Distributed Switch is not needed or is not functioning.

n

The Distributed Switch needs to be repaired to restore connectivity to vCenter Server and the hosts

need to remain accessible.

n

You do not want vCenter Server to manage the host. When the host is not connected to vCenter Server,

most Distributed Switch features are unavailable to the host.

Prerequisites

Verify that your management network is connected to a distributed switch.

Procedure

1

From the direct console, select Restore Standard Switch and press Enter.
If the host is on a standard switch, this selection is dimmed, and you cannot select it.

2

Press F11 to confirm.

Test Connectivity to Devices and Networks

You can use the direct console to perform some simple network connectivity tests. In addition to the

management network, you can specify other devices and networks.

Procedure

1

From the direct console, select Test Management Network and press Enter.

2

Type addresses to ping or another DNS host name to resolve.

3

Press Enter to start the test.

Storage Behavior

When you start ESXi, the host enters an autoconfiguration phase during which system storage devices are

configured with defaults.

N

OTE

   Partitioning for hosts that are upgraded to ESXi 5.x from ESXi versions earlier than version 5.0 differs

significantly from partitioning for new installations of ESXi 5.x. See the vSphere Upgrade documentation.

vSphere Installation and Setup

258 

 VMware, Inc.

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Reviews:

No comments