background image

Table 2

12.  

Ports Required for Communication Between Components

Port

Description

80

vCenter Server requires port 80 for direct HTTP connections. Port 80 redirects requests to HTTPS

port 443. This redirection is useful if you accidentally use http://server instead of https://server.
If you use a custom Microsoft SQL database (not the bundled SQL Server 2008 database) that is

stored on the same host machine as the vCenter Server, port 80 is used by the SQL Reporting Service.

When you install vCenter Server, the installer will prompt you to change the HTTP port for vCenter

Server. Change the vCenter Server HTTP port to a custom value to ensure a successful installation.
Microsoft Internet Information Services (IIS) also use port 80. See 

“Conflict Between vCenter Server

and IIS for Port 80,”

 on page 26.

389

This port must be open on the local and all remote instances of vCenter Server. This is the LDAP port

number for the Directory Services for the vCenter Server group. The vCenter Server system needs to

bind to port 389, even if you are not joining this vCenter Server instance to a Linked Mode group. If

another service is running on this port, it might be preferable to remove it or change its port to a

different port. You can run the LDAP service on any port from 1025 through 65535.
If this instance is serving as the Microsoft Windows Active Directory, change the port number from

389 to an available port from 1025 through 65535.

636

For vCenter Server Linked Mode, this is the SSL port of the local instance. If another service is

running on this port, it might be preferable to remove it or change its port to a different port. You can

run the SSL service on any port from 1025 through 65535.

902

The default port that the vCenter Server system uses to send data to managed hosts. Managed hosts

also send a regular heartbeat over UDP port 902 to the vCenter Server system. This port must not be

blocked by firewalls between the server and the hosts or between hosts.

8080

Web Services HTTP. Used for the VMware VirtualCenter Management Web Services.

8443

Web Services HTTPS. Used for the VMware VirtualCenter Management Web Services.

60099

Web Service change service notification port

6501

Auto Deploy service

6502

Auto Deploy management

7005

vCenter Single Sign-On

7009

vCenter Single Sign-On

7080

vCenter Single Sign-On

7444

vCenter Single Sign-On HTTPS

9443

vSphere Web Client HTTPS

9090

vSphere Web Client HTTP

10080

vCenter Inventory Service HTTP

10443

vCenter Inventory Service HTTPS

10109

vCenter Inventory Service Management

10111

vCenter Inventory Service Linked Mode Communication

To have the vCenter Server system use a different port to receive vSphere Web Client data, see the vCenter

Server and Host Management documentation.
For a discussion of firewall configuration, see the vSphere Security documentation.

vSphere Installation and Setup

24 

 VMware, Inc.

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Reviews: