VMware VS4-ENT-PL-A - vSphere Enterprise Plus Setup Manual Download Page 69

Page: 69 / 276

Confirm that the md5sum is correct.
See the VMware Web site topic Using MD5 Checksums at

http://www.vmware.com/download/md5.html

Microsoft SQL Database Set to Unsupported Compatibility Mode
Causes vCenter Server Installation or Upgrade to Fail

vCenter Server installation with a Microsoft SQL database fails when the database is set to compatibility

mode with an unsupported version.

Problem

The following error message appears:

The DB User entered does not have the required permissions

needed to install and configure vCenter Server with the selected DB. Please correct the following
error(s): %s

Cause

The database version must be supported for vCenter Server. For SQL, even if the database is a supported

version, if it is set to run in compatibility mode with an unsupported version, this error occurs. For example,

if SQL 2008 is set to run in SQL 2000 compatibility mode, this error occurs.

Solution

Make sure the vCenter Server database is a supported version and is not set to compatibility mode with

an unsupported version. See the VMware Product Interoperability Matrixes at

http://partnerweb.vmware.com/comp_guide2/sim/interop_matrix.php?

Chapter 3 Before You Install vCenter Server

VMware, Inc.

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Search results

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus

Reviews:

Brands by name

Popular brands

VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual

Search results

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus

Reviews:

Brands by name

Popular brands