manualshive.com logo in svg

VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual

The VMware VS4-ENT-PL-A - vSphere Enterprise Plus is a powerful virtualization software suite. Maximize your data center's capabilities with this cutting-edge product. For a hassle-free setup, easily download the user manual for free from manualshive.com. Get the most out of your VMware experience with this comprehensive manual.

Share
Download
background image

What to do next

n

Request access to a vSphere Web Client that can access the vCenter Server system that will manage the

Auto Deploy server.

n

Configure the Auto Deploy and TFTP environment. See 

“Configure the Auto Deploy and TFTP

Environment in the vSphere Web Client,”

 on page 218.

Configure the Auto Deploy and TFTP Environment in the vSphere Web Client

You must download a FTP Boot ZIP file from your Auto Deploy server. The customized FTP server serves

the boot images that Auto Deploy provides. You can perform the task in the vSphere Web Client.

Prerequisites

n

Make sure your system meets the requirements in the preinstallation checklist. See 

“Proof of Concept

Preinstallation Checklist,”

 on page 212.

n

Perform all preceding proof of concept setup tasks. See 

“Auto Deploy Proof of Concept Setup,”

 on

page 212 for the complete list.

Procedure

1

From your Web browser, access the URL of the vSphere Web Client that connects to the vCenter Server

system which manages the Auto Deploy Server.

2

When the Certificate warning appears continue to the vCenter Server system.

3

In the inventory, drill down to the vCenter Server system.

4

Click the Manage tab, select Settings, and click Auto Deploy.

5

Click Download TFTP Boot Log to download the TFTP configuration file.
 

 

6

Save the file (

Deploy-tftp.zip

) to the TFTP_Root directory that you created when you installed the

TFTP Server and unzip the file into that directory.

7

Minimize the Web browser you are using with the vSphere Web Client.

What to do next

Prepare the depot from which Auto Deploy retrieves the ESXi software when it provisions the hosts. See 

“Prepare the ESXi Software Depot,”

 on page 219.

vSphere Installation and Setup

218 

 VMware, Inc.

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Reviews:

No comments

Related manuals for VS4-ENT-PL-A - vSphere Enterprise Plus

Garmin eTrex H - Hiking GPS Receiver Owner'S Manual preview
eTrex H - Hiking GPS Receiver
Brand: Garmin Pages: 100
Snom Configuring snom phones for Mass Deployment Frequently Asked Questions Manual preview
Configuring snom phones for Mass Deployment
Brand: Snom Pages: 22
Novell GROUPWISE 7 - WEB ACCESS Manual preview
GROUPWISE 7 - WEB ACCESS
Brand: Novell Pages: 110
Red Hat ENTERPRISE VIRTUALIZATION FOR DESKTOPS Solution Manual preview
ENTERPRISE VIRTUALIZATION FOR DESKTOPS
Brand: Red Hat Pages: 14
Avaya IP Agent Installation And User Manual preview
IP Agent
Brand: Avaya Pages: 286
Blackberry ENTERPRISE SOLUTION ERASING FI Overview preview
ENTERPRISE SOLUTION ERASING FI
Brand: Blackberry Pages: 10
IBM ZVSE PARALLEL ACCESS Manual preview
ZVSE PARALLEL ACCESS
Brand: IBM Pages: 10
Brady markware User Manual preview
markware
Brand: Brady Pages: 33
I-Data ida ReRouter Installation & Operator’S Manual preview
ida ReRouter
Brand: I-Data Pages: 79
Genius VIDEOCAM SLIMCLIP Installation Manual preview
VIDEOCAM SLIMCLIP
Brand: Genius Pages: 7
Native Instruments Scarbee MM-Bass User Manual preview
Scarbee MM-Bass
Brand: Native Instruments Pages: 39
Tandberg Data B DLTSAGE INTEGRATION Integration Manual preview
B DLTSAGE INTEGRATION
Brand: Tandberg Data Pages: 36
TANDBERG MOVI D14409.01 User Manual preview
MOVI D14409.01
Brand: TANDBERG Pages: 17
Xerox DC 220 ST Tips And Tricks preview
DC 220 ST
Brand: Xerox Pages: 4
Sun Microsystems GlassFish 3 Installation Manual preview
GlassFish 3
Brand: Sun Microsystems Pages: 32
Minolta PCL6 User Manual preview
PCL6
Brand: Minolta Pages: 88
Ulead USBAV-701 User Manual preview
USBAV-701
Brand: Ulead Pages: 22
Garmin 010-10844-00 - Mobile XT - GPS Software Manual preview
010-10844-00 - Mobile XT - GPS Software
Brand: Garmin Pages: 8

Brands by name

Popular brands

Load more brands