manualshive.com logo in svg

VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual

The VMware VS4-ENT-PL-A - vSphere Enterprise Plus is a powerful virtualization software suite. Maximize your data center's capabilities with this cutting-edge product. For a hassle-free setup, easily download the user manual for free from manualshive.com. Get the most out of your VMware experience with this comprehensive manual.

Share
Download
background image

5

Create an ISO file containing the password.

mkisofs -R -o rootpass.iso cd

6

Attach the CD/DVD drive of the vCenter Server Appliance virtual machine to the 

rootpass.iso

 file, and

make sure that Connected at power on is selected.

When you turn on the vCenter Server Appliance, it reads and applies the custom password you created for

the root user.

Configure a vCenter Server Appliance to Use the vCenter Single Sign-On of a
Different Virtual Machine

You can direct one or more vCenter Server Appliances to use a vCenter Single Sign-On instance running on

another virtual machine. This action makes all the vCenter Server instances accessible by each

vSphere Web Client configured with the same vCenter Single Sign-On instance.
You can also set a new vCenter Server Appliance to use an external vCenter Single Sign-On instance when

you run the vCenter Server Setup wizard for a newly deployed vCenter Server Appliance. See 

“Download

and Deploy the VMware vCenter Server Appliance,”

 on page 94.

Prerequisites

n

Verify that you have the URL of the Lookup Service for the target instance of vCenter Single Sign-On.

Procedure

1

Connect to the vCenter Server Appliance from a Web browser.

2

On the vCenter Server tab, click SSO.

3

Set the SSO deployment type to external.

4

Under Lookup service location, type the URL of the Lookup Service for the target instance of vCenter

Single-Sign On.

The new vCenter Server Appliance is configured to use the existing vCenter Single Sign-On instance, and

both vCenter Server instances are accessible by the vSphere Web Client of either vCenter Server Appliance.

What to do next

You can repeat this procedure for multiple vCenter Server Appliances.

Chapter 4 Installing vCenter Server

VMware, Inc. 

 97

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Reviews:

No comments

Related manuals for VS4-ENT-PL-A - vSphere Enterprise Plus

Waves Linear-Phase MultiBand Software Audio Processor User Manual preview
Linear-Phase MultiBand Software Audio Processor
Brand: Waves Pages: 27
PS Audio PowerPlay Programming Manual preview
PowerPlay
Brand: PS Audio Pages: 6
Nokia Series 60 Manual preview
Series 60
Brand: Nokia Pages: 84
Red Hat CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE Manual preview
CERTIFICATE SYSTEM 6.0 - MIGRATION GUIDE
Brand: Red Hat Pages: 76
Extron electronics AVT 100 User Manual preview
AVT 100
Brand: Extron electronics Pages: 37
Texas Instruments InterActive! Getting Started Manual preview
InterActive!
Brand: Texas Instruments Pages: 63
Juniper STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2 Upgrade Manual preview
STRM 2008.2R2 - UPGRADING TO STRM 2008.2R2 REV 2
Brand: Juniper Pages: 5
Focusrite Liquid 4PRE User Manual preview
Liquid 4PRE
Brand: Focusrite Pages: 35
Bay Networks NA User Manual preview
NA
Brand: Bay Networks Pages: 88
Livescribe Desktop 2.3.1 User Manual preview
Desktop 2.3.1
Brand: Livescribe Pages: 88
Oracle Application Server 10.1.3.4 User Manual preview
Application Server 10.1.3.4
Brand: Oracle Pages: 170
Baby Lock Baby Lock Embroidery Professional PLUS Instructions preview
Baby Lock Embroidery Professional PLUS
Brand: Baby Lock Pages: 5
MACROMEDIA COLDFUSION 4.5-DEVELOPING WEB Develop Manual preview
COLDFUSION 4.5-DEVELOPING WEB
Brand: MACROMEDIA Pages: 380
KapLogic Aegis2.2x Installation Manual preview
Aegis2.2x
Brand: KapLogic Pages: 24
Jensen GPS navigation software for Audiovox NVX200 User Manual preview
GPS navigation software for Audiovox NVX200
Brand: Jensen Pages: 86
Xerox DocuSP 50. Series User Manual preview
DocuSP 50. Series
Brand: Xerox Pages: 32
Samsung SCX 5530FN - Multifunction... Manual preview
SCX 5530FN - Multifunction...
Brand: Samsung Pages: 35
Xerox Scan to PC Desktop v9.0 Network Installation Manual preview
Scan to PC Desktop v9.0
Brand: Xerox Pages: 16

Brands by name

Popular brands

Load more brands