manualshive.com logo in svg

VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual

The VMware VS4-ENT-PL-A - vSphere Enterprise Plus is a powerful virtualization software suite. Maximize your data center's capabilities with this cutting-edge product. For a hassle-free setup, easily download the user manual for free from manualshive.com. Get the most out of your VMware experience with this comprehensive manual.

Share
Download
background image

Preparing vCenter Server Databases

vCenter Server and vSphere Update Manager require databases to store and organize server data.
Each vCenter Server instance must have its own database. For small installations (up to 5 hosts and 50

virtual machines), you can use the bundled Microsoft SQL Server 2008 Express database, which you can

choose to have the vCenter Server installer create during the vCenter Server installation. Larger installations

require a supported database, prepared as described in the subtopics of this section.
vCenter Server instances cannot share the same database schema. Multiple vCenter Server databases can

reside on the same database server, or they can be separated across multiple database servers. For Oracle

databases, which have the concept of schema objects, you can run multiple vCenter Server instances in a

single database server if you have a different schema owner for each vCenter Server instance. You can also

use a dedicated Oracle database server for each vCenter Server instance.
You do not need to install a new database server for the vCenter Server installation to work. During

vCenter Server installation, you can point the vCenter Server system to any existing supported database.

vCenter Server supports Oracle and Microsoft SQL Server databases. Update Manager supports Oracle and

Microsoft SQL Server databases. For information about supported database server versions, see the VMware

Product Interoperability Matrix at 

http://www.vmware.com/resources/compatibility/sim/interop_matrix.php

.

C

AUTION

   If you have a VirtualCenter database that you want to preserve, do not perform a fresh installation

of vCenter Server. See the vSphere Upgrade documentation.

VMware recommends using separate databases for vCenter Server and Update Manager. For a small

deployments, a separate database for Update Manager might not be necessary.

vCenter Server Database Configuration Notes

After you choose a supported database type, make sure you understand any special configuration

requirements.

Table 3-1

 is not a complete list of databases supported with vCenter Server. For information about specific

database versions and service pack configurations supported with vCenter Server, see the 

VMware Product

Interoperability Matrixes

. This topic is intended only to provide special database configuration notes not

listed in the Product Interoperability Matrixes.
vCenter Server databases require a UTF code set.
Contact your DBA for the appropriate database credentials.

Table 3

‑

1.  

Configuration Notes for Databases Supported with vCenter Server

Database Type

Configuration Notes

Microsoft SQL Server 2008

R2 Express

Bundled database that you can use for small deployments of up to 5 hosts and 50 virtual

machines.
N

OTE

   This database is not supported for the vCenter Server Appliance.

Microsoft SQL Server 2005

Ensure that the machine has a valid ODBC DSN entry.
If Microsoft SQL Server 2005 is not already installed and the machine has MSXML Core

Services 6.0 installed, remove MSXML Core Services 6.0 before installing Microsoft SQL

Server 2005. If you cannot remove it using the Add or Remove Programs utility, use the

Windows Installer CleanUp utility. See 

http://support.microsoft.com/kb/968749

.

N

OTE

   This database is not supported for the vCenter Server Appliance.

vSphere Installation and Setup

30 

 VMware, Inc.

Summary of Contents for VS4-ENT-PL-A - vSphere Enterprise Plus





















































































































































































































































































Reviews:

No comments

Related manuals for VS4-ENT-PL-A - vSphere Enterprise Plus

FARONICS ANTI-EXECUTABLE ENTERPRISE Manual preview
ANTI-EXECUTABLE ENTERPRISE
Brand: FARONICS Pages: 68
MAGIX VIDEO EASY3hd Manual preview
VIDEO EASY3hd
Brand: MAGIX Pages: 88
Vaisala Veriteq viewLinc 4.0 Administrator'S Manual preview
Veriteq viewLinc 4.0
Brand: Vaisala Pages: 168
NETGEAR GS700AT Series Installation Manual preview
GS700AT Series
Brand: NETGEAR Pages: 2
Novell ZENworks Network Access Control 5.0 User Manual preview
ZENworks Network Access Control 5.0
Brand: Novell Pages: 534
Citrix MetaFrame MetaFrame Presentation Server Reviewer'S Manual preview
MetaFrame MetaFrame Presentation Server
Brand: Citrix Pages: 97
Siemens OC130S Installation Instructions Manual preview
OC130S
Brand: Siemens Pages: 11
Siemens ID Mouse V 3.1 User Manual preview
ID Mouse V 3.1
Brand: Siemens Pages: 28
Siemens ROS User Manual preview
ROS
Brand: Siemens Pages: 32
Siemens OpenScape Xpressions PhoneMail User Manual preview
OpenScape Xpressions PhoneMail
Brand: Siemens Pages: 110
EVGA PCoIP Technology User Manual preview
PCoIP Technology
Brand: EVGA Pages: 27
Oracle B31679-01 Installation Manual preview
B31679-01
Brand: Oracle Pages: 130
MACROMEDIA COLDFUSION STUDIO 5-USING COLDFUSION 5... Use Manual preview
COLDFUSION STUDIO 5-USING COLDFUSION 5...
Brand: MACROMEDIA Pages: 328
National Instruments BridgeVIEW User Manual preview
BridgeVIEW
Brand: National Instruments Pages: 455
TANDBERG MOVI 4.0 - FOR WINDOWS 09-2010 User Manual preview
MOVI 4.0 - FOR WINDOWS 09-2010
Brand: TANDBERG Pages: 19
ICP GDTMON Manual preview
GDTMON
Brand: ICP Pages: 60
DAVIS WeatherLink Software User'S Manual preview
WeatherLink
Brand: DAVIS Pages: 116
Canon 9320A010 - EOS Rebel XSi Starter Instruction Manual preview
9320A010 - EOS Rebel XSi Starter
Brand: Canon Pages: 55

Brands by name

Popular brands

Load more brands