VMware VS4-ENT-PL-A - vSphere Enterprise Plus, Setup Manual

Page: 251 / 276

6 Make sure that the VMkernel.Boot.logPort and VMkernel.Boot.gdbPort fields are not set to use the
com port that you want to redirect the direct console to.
7 Set VMkernel.Boot.tty2Port to the serial port to redirect the direct console to:
com1
or
com2.
8 Click OK.
9 Save the host profile and attach the host to the profile. See the vSphere Host Profiles documentation.
The setting to redirect the direct console to a serial port is stored by vCenter Server and persists when you
reprovision the host with Auto Deploy.
Set the Password for the Administrator Account
You can use the direct console to set the password for the administrator account (root).
The administrative user name for the ESXi host is root. By default, the administrative password is not set.
Procedure
1 From the direct console, select Configure Password.
2 (Optional) If a password is already set up, type the password in the Old Password line and press Enter.
3 In the New Password line, type a new password and press Enter.
4 Retype the new password and press Enter.
Configuring the BIOS Boot Settings
If your server has multiple drives, you might need to configure the BIOS settings.
The BIOS boot configuration determines how your server boots. Generally, the CD-ROM device is listed
first.
N
OTE
If you are using ESXi Embedded, the BIOS boot configuration determines whether your server boots
into the ESXi boot device or another boot device. Generally, the USB flash device is listed first in the BIOS
boot settings on the machine that hosts ESXi.
You can change the boot setting by configuring the boot order in the BIOS during startup or by selecting a
boot device from the boot device selection menu. When you change the boot order in the BIOS, the new
setting affects all subsequent reboots. When you select a boot device from the boot device selection menu,
the selection affects the current boot only.
Some servers do not have a boot device selection menu, in which case you must change the boot order in the
BIOS even for one-time boots, and then change it back again during a subsequent reboot.
Change the BIOS Boot Setting for ESXi
Configure the BIOS boot setting for ESXi if you want the server to boot into ESXi by default.
ESXi Installable and ESXi Embedded cannot exist on the same host.
Procedure
1 While the ESXi host is powering on, press the key required to enter your host’s BIOS setup.
Depending on your server hardware, the key might be a function key or Delete. The option to enter the
BIOS setup might be different for your server.
Chapter 8 Setting Up ESXi
VMware, Inc. 251